DURAVIT SensoWash i Plus - Water Filter; Descaling

Water filter
Clean the water filter regularly or when the water flow becomes smaller than usual.
NOTICE
Product / property damage due to wrong cleaning / assembly
Wrong cleaning and assembly of water filter can lead to product or water damage.
> Do NOT use detergent.
> Do NOT use excessive force.
> Do NOT use screw drivers to dismantle and assemble the water filter.
> Make sure the O-rings are in place before attaching water filter. Do NOT distort the
O-rings.
1
2
Descaling
NOTICE
Product damage due to limescale build-up
In regions with hard water, limescale build-up can impair the performance of
the product.
> Descale the product regularly (
Table : Descaling cycles.)
> Only use descaling agents provided or approved by Duravit.
Water hardness Descaling cycle
soft < 8.4°dH(1.5mmol/l) every six months
moderate 8.4–14°dH(1.5–2.5mmol/l) every six months
hard > 14°dH(2.5mmol/l) quarterly
Table 5: Descaling cycles
The descaling process can be activated via app
> Follow the instructions provided in the app.
1
2
1
> Remove side
panel.
2
> Follow instructions
next to the filter.
3
> Attach side
panel.
28
EN