DURAVIT SensoWash - General function

49
The status display
D
on the unit flashes
red, green or orange.
Malfunction.
> Remove the connection to the
mains supply and stop using
the unit. Contact your local
authorised customer service
in order to service the unit.
The FI circuit breaker
keeps triggering.
The leakage current is too
high.
> Remove the connection to the
mains supply and stop using
the unit. Contact your local
electrical installation engi-
neer.
General function
SensoWash
®
is not
working.
SensoWash
®
is not swit-
ched on.
> Press the "Power" button
for longer to return to the
normal operating mode
(see chapter 6).
A water leak exists
Caution!
> Close the main valve for the
water supply.
> Disconnect the power supply.
> Call the installer.
Problem Potential cause Solution