50
EN
Remote control
The remote control
does not work.
The batteries are flat. > Change the batteries.
The battery connections
are reversed.
> Insert the batteries the
correct way round.
The remote control
is not responding
reliably.
The batteries are almost
flat.
> Change the batteries.
The side of the remote
control where the signal is
sent or received is obst-
ructed with dust or other
objects.
> Remove the dust or objects.
The remote control is too
far away from the unit.
> Use the remote control closer
to the unit.
Rearwash/Ladywash
Switching between
the Rearwash and
Ladywash takes too
long.
When switching between
Rearwash and Ladywash,
the spray wand moves
back and then forward
again after self-cleaning is
complete.
This is normal.
Problem Potential cause Solution
To Next Page
Loading...
