51
The water spray
intensity is too weak.
The water spray intensity
has been set to "Low".
> Select the "Water spray
intensity" option on the
remote control
11
to adjust
the water spray intensity.
The water supply hose has
buckled.
> Contact your installer to have
this checked.
The temperature of
the shower water is
not warm enough.
The water temperature has
been set to "Off" or "Low".
> Adjust the water temperature
at the remote control (see
chapter 6).
The water spray
from the spray wand
suddenly stops.
The function automatically
stops after 5 minutes.
This is normal.
The seat sensor is losing
contact with the user more
frequently.
> Sit down again and press the
Rearwash/Ladywash button
once again.
Problem Potential cause Solution
To Next Page
Loading...
