To Next PageTo Next Page
What to do if maximum speed exceeded on DURKOPP ADLER 867 Sewing Machine?
If the maximum speed is exceeded on your DURKOPP ADLER Sewing Machine, replace the encoder, perform a reset, and check the class (t 51 04).
What to do if DURKOPP ADLER Sewing Machine shows software update error?
If you encounter a software update error on your DAC classic DURKOPP ADLER Sewing Machine, where only the functions of the DAC basic remain available, attempt another software update. If the issue persists, consider replacing the control.
What to do if DURKOPP ADLER Sewing Machine shows checksum error during update?
If you encounter a checksum error during an update on your DURKOPP ADLER Sewing Machine, first check the connection cables. If the problem persists, attempt a software update. If the issue still occurs, consider replacing the DACextension box.
Why is the thread breaking on my DURKOPP ADLER Sewing Machine?
If the thread is breaking on your DURKOPP ADLER Sewing Machine, several factors could be at play. Ensure the needle and hook threads are correctly threaded. A bent or sharp-edged needle should be replaced. Make sure the needle is properly inserted into the needle bar and that you're using the recommended thread. Also, check the thread tensions, as they might be too tight for the thread being used. Inspect thread-guiding parts for any sharp edges and have damaged throat plates, hooks, or spreaders reworked by qualified specialists.
How to troubleshoot error in the reference run on DURKOPP ADLER 867 Sewing Machine?
If there is an error in the reference run on your DURKOPP ADLER Sewing Machine, replace the encoder and eliminate any stiff movement in the sewing machine.
What to do if no external EEprom connected on DURKOPP ADLER 867?
If no external EEprom is connected to your DURKOPP ADLER Sewing Machine, connect the machine ID.
What to do if DA stepper card 2 is not responding on DURKOPP ADLER 867 Sewing Machine?
If DA stepper card 2 is not responding on your DURKOPP ADLER Sewing Machine, check the connection cables and the LEDs of the DACextension box. A software update might also be required.
How to fix software version error on DURKOPP ADLER 867 Sewing Machine?
If you encounter a software version error on your DURKOPP ADLER Sewing Machine (DAC classic only), try updating the software. If the issue persists, consider replacing the control.
What to do if DURKOPP ADLER Sewing Machine shows no valid data on external EEprom?
If your DURKOPP ADLER Sewing Machine indicates no valid data on the external EEPROM because the internal data structures are incompatible, perform a software update.
What to do if DURKOPP ADLER Sewing Machine shows DACextension box boot error?
If you encounter a boot error with the DACextension box on your DURKOPP ADLER Sewing Machine, check the connection cables. If the issue persists, try a software update. If neither works, replace the DACextension box.
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 12 mm |
| Needle System | 134-35 |
| Needle Thread Tension | Adjustable |
| Lubrication | Automatic |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 3000 stitches per minute |
| Presser Foot Lift | 20 mm |
| Power Requirements | 230V/50Hz |
