DS100S AC Servo Manual
DS Series AC Servo Systems
Strong Overload Capability
Because it adopts industrial intelligent power module
IPM, it has advantages of strong overload capacity
and high starting torque. Moreover the load that it
withstands are three times stronger than the rated
torque. it is pretty good on the occasion of which the
load occurs fluctuations suddenly and that is required
to start working quickly.
High Response Frequency: 1.5KHz
Due to the perfect use of the advanced PID control
algorithm and the feed-forward torque , It greatly
improves the dynamic response performance, and
effectively shorten the setting time. And the dynamic time
of acceleration and deceleration of the motor is short,
which is usually within tens of milliseconds.The drive
velocity response frequency can be up to 1.5KHz and the
rated speed can be up to 3000rpm.
Excellent Anti-interference Ability
By real-time observation of external disturbance and real-time
dynamic compensation, the speed fluctuation and torque
fluctuation caused by external disturbance are reduced.
Good Position Following Capability
By adopting load identification and torque feed-forward advanced control algorithm,very small
velocity ripple and position error can be achieved. Moreover, we configure 17-bit absolute encoder
so that it can largely improve the stability in low speed and positioning accuracy. And it also
provides control methods including position, velocity, torque, speed trial operation and JOG for our
customers to choose conveniently.
To Next Page
Loading...