7
Preparing Your Digital Video Camera
●Step 1 Insert two "AA" batteries into the battery compartment.
●Step 2 When inserting SD/MMC memory card, follow the icon shown in the
compartment to insert or remove the card push-and-pull.
Then, push the memory card all the way into the memory compartment and
close the battery door, push the battery door down and then slide it closed.
●Step 3 Attach the wrist strap to the strap holder in the side of the Digital
Video Camera as illustrated in the picture below.
3.Getting Started
Note: When memory card is inserted, the internal 16MB flash memory is
disabled.
To Next Page
Loading...
Need help?
General
