Why does my DXG DXG-533V suddenly turn off?
There are two common reasons why your DXG Camcorder might be turning off unexpectedly. One possibility is that the auto power off function is enabled, so simply turn the power back on. Alternatively, the camera could be running out of battery power, so try replacing the batteries.
What to do if my DXG Camcorder says memory card cannot be used?
If your DXG Camcorder says a memory card cannot be used, the card might be locked; try unlocking it. Another reason could be that the memory card contains images taken by other cameras that are not in DCF format. In this case, format the memory card, but be sure to back up any important files first, as described in section 4.5.5.
Why is my DXG DXG-533V image out of focus?
If the image from your DXG Camcorder is out of focus, it could be that the subject is beyond the camera's focus range. Try taking the picture within the available focus range, and consider using normal or macro mode as described in section 3.2.2.
What to do if my DXG Camcorder captured image is not stored in memory?
If your DXG Camcorder is not storing captured images, it's possible the power was cut off before the image could be saved. Replace the batteries immediately when the battery indicator turns red to avoid this issue.
Why does my DXG Camcorder turn off when capturing image using self-timer?
If your DXG Camcorder turns off when using the self-timer, the camera is likely running out of battery power. Replace the batteries to resolve this issue.
What to do if all DXG Camcorder buttons are inactive?
If all the buttons on your DXG Camcorder are inactive, it's possible a short circuit occurred when connecting the camera to another device. Try removing the batteries from the camera and then reinserting them.
General| Resolution | 5.0 MP |
|---|---|
| Video Resolution | 640 x 480 |
| Digital Zoom | 4x |
| Display | 2.4" LCD |
| Storage | SD card |
| Optical Sensor Type | CMOS |
| Battery | Lithium-ion |
