Dymo LabelWriter DUO User Manual

3
2. Installing the Software
NOTE Do not connect the printer to your computer until instructed to do so during
the software installation.
To install the software on a Windows system
1 Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the
installation screen appears.
If the installation screen does not appear:
a. Click Start, then Run on the Windows taskbar. The Run dialog box
appears.
b. Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive)
and click OK.
2 Select the language version you wish to install and follow the instructions.
To install the software on a Mac OS system
1 Insert the DYMO LabelWriter CD into the CD-ROM drive.
After a few seconds, the DYMO Label Software Installer
icon appears. See Figure 3.
2 Double-click the Installer icon and follow the instructions.
If you do not see your printer in the printer list when the installation is
complete, refer to the ReadMe file for instructions on how to add the printer.
Figure 3

Dymo LabelWriter DUO Specifications

General

Connectivity	USB
Resolution	300 dpi
Print Technology	Direct Thermal
Print Speed	71 labels per minute
Software Compatibility	Windows, Mac OS
Power Source	External Power Adapter
Label Types	Dymo D1 Tape Cassettes (up to 12mm), Dymo LabelWriter Labels