Dymo LabelWriter DUO User Manual

2
Become familiar with the printer’s major components. See Figure 2.
LabelWriter Printer Features
Your LabelWriter printer is a direct thermal printer and does not use ink or toner.
Instead, the printer uses heat from a thermal print head to print on specially
treated labels. Labels are the only supplies you will ever need to buy.
The form-feed button on the front of the printer is used to advance a single label.
The label eject button is used to remove labels from the printer when changing
rolls. The tape tray release button opens the tape tray to insert or remove a label
cassette.
The LED status light allows you to visually determine the current state of the
printer:
• Solid blue - power is on and the printer is ready.
• Flashing blue - labels are not loaded properly or label spool is empty.
Figure 2
Form-feed
Label feed path
and tear bar
USB
connector
DC power
connector
button and LED
Tape tray
cover
Label roll
Top
Platen
release
Label eject
button
release button
Label exit
slot
Label
spool

Dymo LabelWriter DUO Specifications

General

Connectivity	USB
Resolution	300 dpi
Print Technology	Direct Thermal
Print Speed	71 labels per minute
Software Compatibility	Windows, Mac OS
Power Source	External Power Adapter
Label Types	Dymo D1 Tape Cassettes (up to 12mm), Dymo LabelWriter Labels