Dymo LETRATAG 100T User Manual

6
Selecting a Language
The first time you turn on the power, you are asked to select your
desired language. By default, the language is set to English. The
language option you choose determines the character set that is
available.
To select a language
1. Press
ä.
2. Use the up or down arrow key to select Language and press
ã.
3. Use the up or down arrow key to select the language you want
and press ã.
Setting the Date and Time
You need to set the current date and time so that the date is correct
if you choose to automatically insert a date on your label.
To set the date and time
1. Press
ä.
2. Use the up or down arrow key to select Set Date and press
ã.
The default date is displayed.
3. Use the left or right arrow key to move the cursor over each
setting (month, day, and year) and use the up or down arrow
keys to increase or decrease the value.
LT Momentum WEU.indd 6 09-01-2007 17:23:37

Dymo LETRATAG 100T Specifications

General

Model	LETRATAG 100T
Category	Label Maker
Keyboard Type	QWERTY
Print Resolution	160 dpi
Tape Width	12 mm
Print Technology	Thermal transfer
Memory	9 label memory
Number of Styles	5
Auto Power Off	Yes
Type	Handheld
Label Width	12 mm
Display	13 character LCD
Tape Type	LetraTag
Tape Compatibility	LetraTag tapes
Label Type	Plastic
Font Styles	Normal, Bold, Italic, Outline
Font Sizes	Small, Large
Text Alignment	Left, Center
Power Source	4 x AA batteries (not included)
Battery	4 x AA (not included)