Dymo LETRATAG 100T User Manual

5
Ç Make sure the labelmaker power is turned off before you
disconnect the power adapter from the main power source.
Otherwise, your most recent memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one
label cassette. Visit www.dymo.
com for information about purchasing
additional label cassettes.
Figure 3
To insert the label cassette
1. Lift the label cassette cover to open
the label compartment.
See Figure 3.
Ç Before using the labelmaker for
the first time, remove the protective
cardboard insert from label exit slot.
See Figure 4.
Figure 4
2. Insert the cassette with the label positioned
between the print head and pinch roller.
3. Press firmly until cassette clicks into place.
4. Close the label cassette cover and press
â to turn on the power.
LT Momentum WEU.indd 5 09-01-2007 17:23:37

Dymo LETRATAG 100T Specifications

General

Model	LETRATAG 100T
Category	Label Maker
Keyboard Type	QWERTY
Print Resolution	160 dpi
Tape Width	12 mm
Print Technology	Thermal transfer
Memory	9 label memory
Number of Styles	5
Auto Power Off	Yes
Type	Handheld
Label Width	12 mm
Display	13 character LCD
Tape Type	LetraTag
Tape Compatibility	LetraTag tapes
Label Type	Plastic
Font Styles	Normal, Bold, Italic, Outline
Font Sizes	Small, Large
Text Alignment	Left, Center
Power Source	4 x AA batteries (not included)
Battery	4 x AA (not included)