Dymo LETRATAG 100T User Manual

9
CAPS Mode
The [ key toggles capitalization on or o. When CAPS mode is
turned on, the CAPS mode indicator is shown on the display and all
letters that you enter will be capitalized. The default setting is CAPS
mode on. When CAPS mode is o, all letters appear in lower case.
Num Lock
The ñ key provides access to the numbers located on some of
the alphabetic keys. When Num Lock mode is turned on, the Num
Lock indicator is shown on the display and the numbers 0 through
9 appear when you press the corresponding letter keys. Num Lock is
turned o by default.
Backspace
The ó key removes the character to the left of the cursor.
Clear
The î key clears all label text and formatting.
Navigation Keys
You can review and edit your label using the left and right arrow keys
on the Navigation key. You can navigate through menu selections
using the up and down arrow keys, and then press ã to make a selection.
LT Momentum WEU.indd 9 09-01-2007 17:23:37

Dymo LETRATAG 100T Specifications

General

Model	LETRATAG 100T
Category	Label Maker
Keyboard Type	QWERTY
Print Resolution	160 dpi
Tape Width	12 mm
Print Technology	Thermal transfer
Memory	9 label memory
Number of Styles	5
Auto Power Off	Yes
Type	Handheld
Label Width	12 mm
Display	13 character LCD
Tape Type	LetraTag
Tape Compatibility	LetraTag tapes
Label Type	Plastic
Font Styles	Normal, Bold, Italic, Outline
Font Sizes	Small, Large
Text Alignment	Left, Center
Power Source	4 x AA batteries (not included)
Battery	4 x AA (not included)