Dymo LETRATAG 100T User Manual

8
Getting to Know the Labelmaker
Become familiar with the location of the feature and function keys
on your labelmaker. Refer to Figure 1 on the inside front cover. The
following sections describe each feature in detail.
Power
The â button turns the power on and off. After two minutes of
no activity, the power is switched off automatically. The last label
created is remembered and displayed when the power is turned
back on. The previously selected style settings are also restored.
You can also press â to cancel printing and return to edit mode.
LCD Display
You can enter up to 100 characters and
spaces on a label; however, the display
will only show a small portion of the
characters. And, with DYMO’s exclusive
graphical display, any formatting you
add is visible instantly.
For example, the italics and rounded
border added to the text in Figure 5
are clearly displayed.
 ≠ Font size ß CAPS
Æ # lines ∞ Num Lock
Figure 5
Feature indicators appear along the top of the display to let you
know when a feature is selected.
LT Momentum WEU.indd 8 09-01-2007 17:23:37

Dymo LETRATAG 100T Specifications

General

Model	LETRATAG 100T
Category	Label Maker
Keyboard Type	QWERTY
Print Resolution	160 dpi
Tape Width	12 mm
Print Technology	Thermal transfer
Memory	9 label memory
Number of Styles	5
Auto Power Off	Yes
Type	Handheld
Label Width	12 mm
Display	13 character LCD
Tape Type	LetraTag
Tape Compatibility	LetraTag tapes
Label Type	Plastic
Font Styles	Normal, Bold, Italic, Outline
Font Sizes	Small, Large
Text Alignment	Left, Center
Power Source	4 x AA batteries (not included)
Battery	4 x AA (not included)