DYNACO DYNALOGIX II DY 4000 User Manual

W
DruNfiO
DY
4000
Setting
Limits
5. Press and
release the Enter button.
Display should
change to
Clslimit.
6.
Press
and
release the
Enter button.
Display should change
to JogToCls.
See
figure 2.0-3.
7. Press the JOG
DOWN button
to bring the door
down to desired
close
position.
See
figure 2.0-3.
Press the
JOG DOWN
button
to bring
door down.
Display
should
read:
Figure
2.0-3: Jog
Down Button
lf door moves
in
the
opposite direction
of
JOG DOWN
button,
door is out of
phase.
Turn
power
off and switch
T2 &
T3 on the terminal
block.
Turn
power
on and return
to step
one of the set
limit section
(2.0/Stepl).
8.
Press
and
Release the
ENTER button
to save
limit setting.
Display
will
change
back to: Glslimit_Set--OK
.
Press
and
release either
red arrow buttons
to scroll
up or down to
the
PhtLimit
(photo
eye shut off
position).
See
figure
2.0-4.
9.
Press and
release either
arrow
buttons
to scroll
up or
down
to:
10.
11.
Figure 2.0-4: Arrow
Buttons
(Scroll)
Press and
release ENTER button.
Display
will change
to:JogToPht-Enter.
Use the JOG
UP/RESET
button to
bring door up
one inch above
the
photo
eyes.
See figure
2.0-5.
-@b-
,:i,?i:
_@il
ry
MENU-
ENTER
-
4
DYNACO
USA,
INC,
?te.4?adp,
hDaaz
Sa/trq
&Deaiy

DYNACO DYNALOGIX II DY 4000 Specifications

General

Brand	DYNACO
Model	DYNALOGIX II DY 4000
Category	Controller
Language	English