DYNACO DYNALOGIX II DY 4000 User Manual

DY 4000
Run Timers
3.0
Setting the Open and Glose
Run
Timers
The
Open
Run Timer and Close Run Timer act as a
failsafe, to
prevent
the
door
from running
continuously,
when open or close limit switch
fail to stop
door.
These
timers should
be set for a
period
that exceeds
the
duration
of a full
open or close cycle.
1. Press
and
release Open Run Timer button on the
Dynalogix ll controller.
The display
will
change
to: Opening_Time=##. See
figure 3.0-1.
Open/Close
Run Timers
Figure 3.0-1:
Run Timers
2.
Use the
Up and Down arrow buttons to change
the countdown time to the
desired duration.
The Dynalogix llwill automatically save
any changes that
are made. See Figure 3.0-2.
lncrease
Setting
Decrease
Setting
Figure 3.0-2:
Raise/Lower Run Timers
3. Repeat steps 1 and 2 to set the Close
Run Timer.
7
DYNACO USA,
INC,
7k.4eddtt?
wDaon
Sdltlll
&Deo,aVa

DYNACO DYNALOGIX II DY 4000 Specifications

General

Brand	DYNACO
Model	DYNALOGIX II DY 4000
Category	Controller
Language	English