TECHNISCHE DATEN
Models L 300 L 500 L 1000 L 1600 L 2400
Output Power (20Hz - 20kHz / THD = 0,1%)
into 8 Ohms 2 x 100 W 2 x 175 W 2 x 350 W 2 x 500 W 2 x 750 W
nto 4 Ohms 2 x 150 W 2 x 250 W 2 x 500 W 2 x 800 W 2 x 1200 W
into 2 Ohms 2 x 210 W 2 x 300 W 2 x 600 W 2 x 1000 W 2 x 1500 W
into 8 Ohms bridged 1 x 300 W 1 x 500 W 1 x 1000 W 1 x 1600 W 1 x 2400 W
into 4 Ohms bridged 1 x 420 W 1 x 600 W 1 x 1200 W 1 x 2000 W 1 x 3000 W
Output Power (1kHz / THD = 1,0%)
into 8 Ohms 2 x 120 W 2 x 180 W 2 x 370 W 2 x 560 W 2 x 850 W
into 4 Ohms 2 x 190 W 2 x 280 W 2 x 550 W 2 x 900 W 2 x 1300 W
into 2 Ohms 2 x 220 W 2 x 320 W 2 x 650 W 2 x 1200 W 2 x 1800 W
into 8 Ohms bridged 1 x 380 W 1 x 560 W 1 x 1100 W 1 x 1800 W 1 x 2600 W
into 4 Ohms bridged 1 x 440 W 1 x 640 W 1 x 1300 W 1 x 2400 W 1 x 3600 W
Technical Specifi cation
Frequency Response 0dB ..... -1dB / 20 Hz ....20 kHz
Phase Response ± 30° / 20 Hz .....20 kHz
Max. Output Level 34V / RMS 45V / RMS 66V / RMS 72V / RMS 91V / RMS
before clipping, no load
reference 1 KHz / THD = 1%
Voltage Gain 26 dB (constant gain option)
reference 1kHz, constant gain option
Input Sensitivity 0 dBu/0.775 V
at rated output power / 4 ohm 6 dBu/1.55 V
reference 1 kHz
Maximum Input Level 21 dBu / 8.7 V
Input Impedance 20 kOhm
active balanced
THD < 0.05%
at rated output power MBW = 80 kHz, f = 1kHz
IMD - SMPTE < 0.01%
60 Hz, 7 kHz, at rated output power
Signal / Noise Ratio > 105 dB
rated output level / 4ohms to noise A-weighted , input sens. 6dBu
Crosstalk < -70 dB
at rated output power, reference 1 kHz
Damping Factor > 300
internal, 1kHz
DIM 30 < 0.01%
DIM 100 < 0.01%
Slew Rate internal > 20V/ μs > 25V/μs > 30 V/μs > 35 V/μs > 40V/μs
Power Consumption 200 W 300 W 600 W 1100 W 1650 W
1/8 rated output power 4 Ohm
Dimensions (WxHxD) 483 x 88.1 x 426 mm / 483 x 132.5 x 426 mm
Weight 13 kg 14 kg 17 kg 27 kg 29 kg
Optional Input Transformer 90176 90176 90176 90176 90176
8
To Next Page
Loading...
Need help?
General
