CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
24
Network Address Translation (NAT) is a method to substitute the information of IP address space from private IP to public IP
when the devices which connected to the router access to the Internet. The router records the source/destination address on
table and maps the IP while receiving packages from Internet.
The connection type to access Internet.
Maximum transmission unit (MTU) is the largest data packet for the router capable to transmit and receive. The data packets
exceed MTU will be fragmented while transmitting and be reassembled once the packets reach the destination.
Automatically get WAN IP address from the ISP.
If your WAN connection requires a static IP address, key in the IP address in this field.
If your WAN connection requires a static IP address, key in the subnet mask in this field
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
Allows your router to get Domain name Service (DNS) IP address from the Internet Service Provider (ISP) automatically.
Enter an IP address as the primary domain name server.
Enter an IP address as the secondary domain name server.
Enter username provided by your ISP.
Enter password provided by your ISP.
This item may be specified by some ISPs. Check with your ISP and fill them in if required.
To Next Page
Loading...
Need help?
General
