Dynalink AXE10200 User Manual

CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
70
6.5.1 
To enable QoS feature in Dynalink router, you can configure from both, APP or Web UI. First you should enable the master QoS setting and specify
maximum upload and download bandwidth. So the QoS logic can start to drop low priority traffic when total bandwidth is approaching the limit. If
the maximum bandwidth number is set too high, QoS will not kick in, if the number is set too low, QoS logic will start to drop packets too early. The
more accurately the max bandwidth is set, the better the QoS function works. We suggest to use a speed test tool. There are many free tools on
the Internet you can use or you can check with your ISP.

Dynalink AXE10200 Specifications

General

Brand	Dynalink
Model	AXE10200
Category	Network Router
Language	English