CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
38
Select Private Network or Guest Network in the dropdown menu to configure DHCP server.
Select the radio button to enable or disable DHCP server.
Enter the domain name of the network or remain default settings.
Define the start and end of the IP address range that the DHCP server will assign to the LAN devices connecting
to your router.
Enter the lease time in seconds that DHCP server will renegotiate with the LAN devices to release and renew
IP addresses.
The router uses the IP address of default gateway to communicates with LAN devices and other networks.
Enter a Domain Name Server address.
Enter a Windows Internet Name Service address.
Select the radio button to enable/disable static IP assignment within DHCP IP pool.
To Next Page
Loading...
