EasyManua.ls Logo

Dynalink AXE10200 - Page 49

Dynalink AXE10200
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
45


Static IPv6


Enter Static IPv6 address.

Enter IPv6 prefix length.IPv6 Prefix Length is used to identify how many bits of a Gobal Unicast IPv6 Address are there in a
network packet.

Enter IPv6 router.


Toggle the switch to enable or disable IPv6 LAN.

Internet Protocol Version 6 (IPv6) is a network layer protocol that enables data communications over a packet switched
network. IPv6 uses 128-bit numbering scheme (2
128
) which has big enough address space for many decades to come.

IPv6 Prefix Length is used to identify how many bits of a Gobal Unicast IPv6 Address are there in network part.

The leftmost fields of the IPv6 address along with the network bits length represented in CIDR format is known as the network
prefix.

Enter the start IPv6 address of the DHCP Pool.

Enter the end IPv6 address of the DHCP Pool.

Prefix Delegation valid lifetime.

Prefix Delegation preferred lifetime.

MTU (Maximum Transmission Unit) is the single largest frame or packet of data that can be transmitted across a network.


Enter a DNS Server address manually.

Enter a second DNS Server address manually.

Enter a third DNS Server address manually.

Related product manuals