Dynalink AXE10200 - Page 83

CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
79

1. Reboot the device – press the reset button for 1 second;
2. Reset the device back to its factory default settings – press and hold for  seconds.


Click the Save button to copy of your current settings and download configuration file to your local computer.

Restore saved settings from a configuration file. Choose Select File to locate a previously saved settings file
on your computer. Select it to restore to your router.

 to default
Revert all the settings to factory default values. Select Reset to default button to revert your router to the
factory default configuration. This resets all settings.