EasyManuals Logo

Dynapac CC142 Service Manual

Dynapac CC142
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
19CC102/C/122/C/132/142/C M102EN4
ISUZU
Run the engine warm before draining the oil.
Make sure that ventilation (extraction) is
adequate if the engine is run indoors.
(Risk of carbon monoxide poisoning).
Switch off the engine and apply the reser-
ve/parking brake.
Place a receptacle that holds at least 8 quarts
under the drain plug. Collect the oil and dis-
pose of it properly.
Risk for burns when draining hot oil. Pro-
tect your hands.
Unscrew the oil drain plug (1).
Allow all of the oil to drain off and refit the plug.
Fill with fresh engine oil; see the Lubricant specification
or the engine manual for the correct grade of oil.
Check the dipstick to ensure that the engine oil level is
correct; see the engine manual for details.
Engine – Oil change
1
Fig. 25 Engine compartment, right side
1. Oil drain
EVERY 250 HOURS OF OPERATION (Monthly)

Other manuals for Dynapac CC142

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CC142 and is the answer not in the manual?

Dynapac CC142 Specifications

General IconGeneral
BrandDynapac
ModelCC142
CategoryConstruction Equipment
LanguageEnglish

Related product manuals