Dynapac CC142 Service Manual

7CC102/C/122/C/132/142/C M102EN4
TECHNICAL SPECIFICATIONS
The vibration values are measured in conformance
with the driving mode described in EU directive
2000/14/EC on EU equipped machines, on soft
polymer material with vibration switched ON and
the operator’s seat in transport mode.
Whole-body vibration is measured at less than the
action value of 0.5 m/s
2
specified in EU directive
2002/44/EC. (The limit value is 1.15 m/s
2
.)
Hand/arm vibration is measured at less than the
action value of 2.5 m/s
2
specified in the same
directive. (The limit value is 5 m/s
2
.)
Noise level can vary when driving on different
courses and with different seat positions.
Vibrations – Drivers seat
(ISO 2631)
Vibration levels may vary when driving on
different courses and with different seat
positions.
CC102 Deutz 105 – –
CC102 Isuzu 102 – –
CC102/LN Isuzu 99 – –
CC102C Deutz 105 – –
CC102C Isuzu 102 – –
CC102C/LN Isuzu 99 – –
CC122 Deutz 105 – –
CC122 Isuzu 102 – –
CC122/LN Isuzu 100 – –
CC122C Deutz 105 – –
CC122C Isuzu 102 – –
CC122C/LN Isuzu 100 – –
CC132 Deutz F2L – – –
CC132 Deutz F3L 106 – –
CC142 106 – –
CC142C 106 – –
The acoustic values are measured in conformance with EU directive
2000/14/EC on EU-equipped machines, on soft polymer material with
vibration switched ON and the operator’s seat in transport mode.
Acoustic values
Model Guaranteed
acoustic
power level
dB(A)
Acoustic
pressure level,
operator’s ear
(platform)dB(A)
Acoustic
pressure level,
operator’s ear
(cab)dB(A)

Dynapac CC142 Specifications

General

Brand	Dynapac
Model	CC142
Category	Construction Equipment
Language	English