3CC102/C/122/C/132/142/C M102EN4
Always use high-quality lubricants in the recommended amounts. Too much grease or
oil can cause overheating and subsequent increased wear.
ENGINE OIL, Shell Rimula Super 15W/40 or equivalent
ambient temperature API CF–4/SG, (CD/CE)
-10°C to +50°C (14°F to 122°F)
HYDRAULIC FLUID,
ambient temperature
-10°C to +40°C (14°F to 104°F) Shell Tellus Oil TX68 or equivalent
ambient temperature
higher than +40°C (104°F) Shell Tellus Oil TX100 or equivalent
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID The machine may be filled with biologically degradable
fluid from the factory. The same type of fluid must be
used when changing or topping off.
DRUM OIL,
ambient temperature
- 15 to +40°C (5°F to 104°F) Shell Spirax AX 80W/90, or equivalent
ambient temperature
higher than +40°C (104°F) Shell Spirax HD85W/140 or equivalent
API GL-5
GREASE Shell Calithia EPT2 or equivalent
Shell Retinax LX2
FUEL See engine manual
COOLANT, (Isuzu) GlycoShell or equivalent
50/50 mixture with water Anti-freeze protection down to about -37°C (-99°F).
Other lubricants are required for driving in extremely high or low ambient temperatures.
See the ”Special instructions” chapter, or consult Dynapac.
Engine, oil level Air filter
Engine, oil filter Battery
Hydraulic reservoir, level Tire pressure
Hydraulic fluid, filter Sprinkler
Drum, oil level Sprinkler water
Lubricating oil Recycling
Fuel filter Sprinkler, tires
Coolant, level
LUBRICANTS AND SYMBOLS
To Next Page
Loading...
Need help?
General
