1CC102/C/122/C/132/142/C M102EN4
Reservation for changes.
Printed in Sweden.
The CC102/122 and CC132 are specially designed for repair work on asphalt compounds, but can
also be used to pave small streets, sidewalks and bicycle trails. They are often utilized as a
complement to bigger rollers for compacting cross-joints and restricted spaces.
The CC102C and CC122C are small, light combo-rollers that
are used for compacting thin layers and soft asphalt compounds.
The CC142 is a typical ”town roller” for compacting asphalt compounds on streets,
parking lots and industrial sites. The capacity for this type of work is adequate for following
a smaller-size surface finisher.
The CC142C is also intended for minor paving jobs on low-traffic asphalt areas where a level and
attractive surface structure is desired. Typical workplaces—in addition to sidewalks and bicycle
trails—include parks, golf courses and sports fields.
Vibratory roller
CC102/102C, CC122/122C
CC132, CC142/142C
Maintenance
M102EN4, April 2004
Diesel engine:
CC102/C/122/C/132 Deutz F2L 2011, Isuzu 3LD1 PW-05
CC132/142/C Deutz F3L 2011
CC142/C Isuzu 3LD1 PW-05
These instructions apply from:
CC102/C/122/C
Deutz PIN (S/N) *60117500*
Isuzu PIN (S/N) *60127500*
CC132 Deutz PIN (S/N) *60232800*
CC142/C
Deutz PIN (S/N) *60212800*
Isuzu PIN (S/N) *60222800*
KEEP THIS MANUAL
AVAILABLE FOR
FUTURE USE
To Next Page
Loading...
Need help?
General
