Page | 8
BURNER DESCRIPTION
Riello and Carlin are the only two burner
manufacturers recommended by Dynatherm™.
Refer to the Burner Configurations section in this
manual to identify the most suitable burner and
model for your boiler.
Retrofit kits are available for older, compatible
burners, such as the original Dynatherm, that are
installed on your boiler.
Refer to the manufacturer’s Installation Manual
for proper installation and settings.
CONTROLS DESCRIPTION
Fuel-fired hot water boilers and associated
controls have evolved over the years to a point at
which they are extremely safe and will operate
automatically in your home.
Dynatherm™ boilers are equipped with a Fuel
Smart Hydrostat 3200-Plus/3250-Plus aquastat.
This unit serves as the boiler water sending unit.
The high temperature, low temperature and
temperature differential are set digitally on this
unit.
Refer to the manufacturer’s Installation Manual
for proper installation and settings.
To Next Page
Loading...