Dynaudio Audience SUB-20A - Specifications

Specifications
Audience SUB-20A
Frequency response 25 Hz-150 Hz (room depending)
Crossover frequency
Variable low-pass 60 Hz-120 Hz
High-pass output 80 Hz, 12 dB per octave
Sensitivity 50 mV
Max. amplifier power output 90 W
Max. SPL 110 dB (typical in-room)
Nominal impedance
Mono, Left, Right input 47 K ohms
Driver 24 cm (9.5 inch)
Dimensions H, W, D 430 mm, 276 mm, 455 mm
(16.9”, 10.9”, 17.9”)
Weight 14 kilograms (30.8 lbs.)
Power consumption
Standby 10 W
Max. 150 W
Audience SUB-30A
Frequency response 23 Hz-150 Hz (room depending)
Crossover frequency
Variable low-pass 60 Hz-120 Hz
High-pass output 80 Hz, 12 dB per octave
Sensitivity 50 mV
Max. amplifier power output 90 W
Max. SPL 115 dB (typical in-room)
Nominal impedance
Mono, Left, Right input 47 K ohms
Driver 30 cm (12 inch)
Dimensions H, W, D 430 mm, 570 mm, 400 mm
(16.9”, 22.4”, 15.7”)
Weight 24 kilograms (52.8 lbs.)
Power consumption
Standby 10 W
Max. 150 W