Dynaudio Sub 6 Owner's Manual

7
Introduction
6
Introduction
Dear music lover
Welcome to Dynaudio Sub6 active DSP
subwoofer. The Sub6 is a very high
performance product that rewards
thoughtful setup and installation so we
suggest that you take a little time to read
this manual before you begin.
We’ve been designing, engineering and
creating speakers at our Denmark
headquarters since 1977, and ever since
we started we’ve been pouring advanced
R&D technology into every model. What
comes out is audio reproduction at the
highest level, making listening to even
the most familiar recordings a new
listening experience altogether. Our aim:
to reproduce exactly what was
happening in the studio at the time of the
original recording.
In fact, we’re one of very few companies
who can realize such concepts. That’s
thanks to Dynaudio Labs, our in-house
development and production facility. It’s
so advanced, in fact, that we’ve been
given TS16949 certication.
Each loudspeaker is constructed and
rigorously tested by our master-craftsmen
to these incredibly demanding standards.
If you want to get the best possible
performance from them (that’s why you
bought Dynaudio in the rst place, after
all), take a look at the information on the
following pages. By considering our tips
and suggestions, you’ll be recreating
what our engineers do in our testing
rooms: extracting every ounce of detail
and nuance in the music… and then
enjoying every second of it.
We wish you many years of enjoyment
with your new subwoofer.
Dynaudio

Dynaudio Sub 6 Specifications

General

Subwoofer type	Active subwoofer
Number of subwoofers	2
Subwoofer peak power	500 W
Subwoofer driver diameter	240 mm
Subwoofer frequency range	16 - 230 Hz
On/off switch	Yes
Product color	Black
Speaker enclosure	Closed
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W

Weight and Dimensions

Subwoofer depth	268 mm
Subwoofer width	447 mm
Subwoofer height	300 mm
Subwoofer weight	21500 g