6 Route the PCIII harness down the
right side following the stock wiring
harness.-
Use the 2 stock plastic ties to secure
the PCIII harness (Fig. D)
7 Locate the black rubber cover on the
right hand side of the scooter that
contains the injector connectors
(Fig. E)
8 Unplug the 2 pin GREEN connector
and the 2 pin BLACK connector
(Fig. F).
Fig. D
Fig. EFig. F
2008 Yamaha Tmax 500 - PCIII USB - 3i437-411 www.powercommander.com
PCIII
harness
Guides
Remove
Unplug
To Next Page
Loading...
