Dynojet Power Commander III Installation Instruction

Fig. L
2007 Ducati 1098 - PCIII USB - 5 
20 Install the PCIII in the tail section using the
supplied velcro. Make sure to clean both
surfaces with the alcohol swab before
attaching.
21 Reinstall all bodywork and fuel tank.
When lowering the fuel tank make sure it
does not interfere with the connection of
the rear injector.
Note: Unless you have the Kit ECU you
will not be able to make fuel changes
below 20% throttle and below 5500rpm
with this PCIII.

Dynojet Power Commander III Specifications

General

Brand	Dynojet
Model	Power Commander III
Category	Motorcycle Accessories
Language	English