3
APPLICATION GUIDE
Target Tune Part Number Application Description
TT-1 & TT-1X
2007-2011 Softail *
2007-2009 Touring
2008-2011 V-Rod **
2006-2011 Dyna
2007-2013 Sportster
2-pin stock O2 connectors
(1 long leg and 1 short leg), 4-pin diagnostic
connector
* 2011 Softail models will require splicing of
the TT module’s power and ground supply
wires; or for a cleaner install with OEM style
connections a 6-pin Y-adapter
(PN: 76950389) and a 6-pin to 4-pin
adapter (PN: 76950664) can be purchased
separately.
** 2008-2011 V-Rod models will require
splicing of the TT module’s power and
ground supply wires; or for a cleaner
install with OEM style connections a power
extension lead (PN: 76950159) can be
purchased separately.
TT-2 & TT-2X 2010-2013 Touring
4-pin stock O2 connectors
(2 short legs), 4-pin diagnostic connector
TT-3 & TT-3X 2012-2017 V-Rod
4-pin stock O2 connectors
(1 long leg and 1 short leg), 4-pin diagnostic
connector
TT-4 & TT-4X
2012-2017 Softail
2012-2017 Dyna
4-pin stock O2 connectors
(1 long leg and 1 short leg), 6-pin diagnostic
connector
TT-5 & TT-5X 2014-2020 Touring
4-pin stock O2 connectors
(2 short legs), 6-pin diagnostic connector
TT-6 & TT-6X 2015-2020 Street 500/750
4-pin stock O2 connectors (special length),
6-pin diagnostic connector
TT-7 & TT-7X
2014-2021 Sportster
2020 Softail
4-pin stock O2 connectors (special length),
6-pin diagnostic connector
TT-8 & TT-8X 2021-2023 Touring
4-pin stock O2 connectors
(2 short legs), 6-pin Euro diagnostic
connector
TT-10 2021-2023 Softail
4-pin stock O2 connectors
(1 long leg and 1 short leg), 6-pin Euro diagnostic
connector with power adapter cable
Note: Target Tune kits that have a part number ending in “X” contain Target Tune modules only. There is no O2 sensor
hardware or Y-adapters supplied in these kits. These are intended for users that are upgrading from PV Auto Tune to
PV Target Tune. These users should already have wideband O2 sensor hardware and Y-adapters installed from the
previously installed PV Auto Tune kit.
To Next Page
Loading...
