What to do if the remote compass is not detected on my Dynon Avionics GPS?
If the remote compass is not detected on your Dynon Avionics GPS, ensure that you have an EDC-D10A installed and verify that the wiring to the EDC-D10A is correct.
Details the warranty terms for the product, covering defects in materials and workmanship.
Provides important cautionary information and recommendations for safe operation.
Explains the guide's purpose and references for additional information.
Explains the use of solid-state sensors for accurate flight information.
Details the power requirements and backup battery for the EFIS-D100.
Describes the sensors used for attitude, airspeed, altitude, and heading.
Explains how multiple Dynon products can be networked together.
Describes the EFIS-D100's 7-inch LCD screen specifications.
Explains user interaction via the six front panel buttons and their functions.
Details how the Air Data Attitude and Heading Reference System generates flight instruments.
Explains how the artificial horizon display is generated using multiple sensors.
Highlights the importance of accurate magnetic heading for autopilot operation.
Describes the front panel buttons and display for operating the EFIS-D100.
Defines terms like Screen, Page, and Screen Rotation for display configurations.
Explains methods for cycling between pre-defined screens using menus and hotkeys.
Explains how the menu system is accessed and navigated using front panel buttons.
Enters the SETUP menu to change preferences like displayed units and clock settings.
Explains how to adjust screen brightness using the DIM menu.
Details setting and using up timers and down timers via the TIMER menu.
Explains configuring internal data logging and retrieving logged data.
Describes EFIS main pages using tapes and indicators overlaid on an artificial horizon.
Explains HSI pages using text and DG compass, requiring external data sources.
Explains the artificial horizon, pitch indicator lines, and roll scale indicators.
Describes CDI and glideslope indicators, their display options, and data sourcing.
Details the heading tape, digital readout, bugs, and ground track indicator.
Explains the altitude tape, digital readout, and the graphical Vertical Speed Indicator (VSI).
Explains the airspeed tape, digital readout, trend indicator, and color coding.
Describes how to set heading, airspeed, or altitude bugs represented by yellow inverted arrows.
Explains the AP Status Indicator displayed on the EFIS page.
Describes the EFIS-D100's function as a Horizontal Situation Indicator (HSI).
Describes user-defined checklists and data panels for quick access.
Describes how to turn the EFIS-D100 unit on and off.
Explains how to adjust the altimeter setting and change units.
Details how to set heading, track, airspeed, or altitude bugs on the display.
Explains setting the heading bug, its toggling, and display on the horizontal tape.
Describes setting the airspeed bug, its toggling, and display on the airspeed tape.
Explains setting the altitude bug, its toggling, and display on the altitude tape.
Explains how to turn display items on or off on the EFIS page using the CLUTTR menu.
Explains how to check the EFIS-D100's current firmware version and operating hours.
Allows displaying informational items like voltmeter, g-meter, VSI, OAT, and engine info.
Lists required external receivers and connections for HSI functionality.
Explains how to display the HSI/DG page using screen rotation hotkeys.
Describes HSI display elements, color coding for data sources, and mode flags.
Describes navigation radio overlay on the HSI page, including text displays and course indicator.
Describes HSI pages with GPS overlay, including text displays, course indicator, and deviation.
Describes the HSI menu structure, including NAVSRC for selecting navigation sources.
Explains the BUG menu for adjusting and toggling heading bugs.
Describes setting the OBS/course for NAV and Localizer modes.
Overview of Dynon Autopilot system and resources for further information.
Describes new indicators on the EFIS presentation when servos are installed.
Explains the AP menu and status indicator for roll and pitch servo states.
Details the different states and displays for AP status indicators (Roll and Pitch).
Lists and describes the Autopilot modes for heading, ground track, and altitude changes.
Describes controlling the Autopilot via the AP74 panel for efficient operation.
Details the AP74's buttons for engaging, arming modes, and controlling AP targets.
Configures when heading and altitude bugs synchronize to current values (ON ENGAGE or ON MODE ARM).
Describes the function of the Disengage/CWS pushbutton for disengaging AP or control wheel steering.
Describes how alarms are indicated via the alarm bar and menu at the bottom of the screen.
Allows displaying the page with the best view of the alarming measurement.
Details how to acknowledge alarms, remove indications, and return to previous screen.
Describes how multiple alarms are handled, stacked, and acknowledged.
Describes the error when all network communication has stopped.
Details the EFIS RS232 port output format for serial data.
Provides the format for data sent out the EFIS RS232 port, including fields and notes.
Describes the PC Support Program for uploading firmware and checklists.
Refers to the Installation Guide Appendix for troubleshooting tips and online support forums.
Lists alert messages, their descriptions, and end conditions.
Alert shown when operating solely on backup battery with low voltage.
Indicates EFIS-D100 cannot communicate with the EDC-D10A.
Alert appears when EFIS loses connection to the OAT sensor or EDC-D10A.
Provides specifications for mounting, weight, temperature, power, connections, and screen.
Lists the inputs and outputs for the EFIS-D100, including audio alarm and communication ports.
Operating Environment| operating temperature range | -22° to 122° F (-30° to 50° C) |
|---|
Power| voltage range | 10 - 30 Vdc |
|---|---|
| typical power consumption | 12 watts |
| maximum power consumption | 17 watts |
Display| display type | AMLCD, TFT (Thin Film Transistor) |
|---|---|
| backlight brightness | 400 nits (or 800 nits with super-bright option) |
| display size | 7.0” diagonal (178 mm) |
| display resolution | 854 x 480 color pixels |
Ports & Interfaces| wiring connector | DB25 male connector |
|---|---|
| RS-232 bidirectional PC communication | 1 |
| RS-232 data inputs | 1 (GPS, SL30, etc.) |
| RS-232 serial encoder output | 1 |
| Dynon Smart Avionics Bus (DSAB) multidrop | 1 |
Weight and Dimensions| width | 6.95” (177 mm) |
|---|---|
| height | 4.90” (125 mm) |
| depth | 4.51” (115 mm) |
To Next Page
