Using Your D3
D3 Pilot’s Guide 5-9
• Style: “Classic” style depicts GPS ground track information as an arc along the bottom of the
screen. “TRK Overlaid’ mode depicts GPS ground track information as a full circular compass
that is inset within the attitude indicator.
• Reset Gmeter resets the G-meter minimums and maximums.
Settings
To adjust unit settings, go to Main Menu > Settings. Settings that can be adjusted include:
• Units: Changes speed and altitude units
• G Meter: Change between normal and aerobatic display ranges, as well as set your own
customer yellow and red lines for G gauge markings.
• Inactivity: The D3 can be configured to automatically power down after a period of inactivity /
nonmovement.
• Version: Displays the current software version of the D3. Compare with the version available
on the Dynon website to determine if newer software is available.
To Next Page
Loading...
