Dynon D3 - 8 Additional Mounting Options; Other Ram Mounts; Included Ram Mount Components

D3 Pilot’s Guide 8-1
8. ADDITIONAL MOUNTING OPTIONS
Other RAM® Mounts
The RAM® suction cup mounting system that is included with your D3 can be adapted and
customized with the use of other components. These can be purchased directly from
www.rammount.com or from any of RAM’s authorized dealers. The RAM® components that come
with the D3 use the B size (1" diameter) ball. Some specific RAM® components that may be useful
in aircraft include:
RAM-B-259U: 1” x 1” glare shield clamp base with 1” ball (finger screws)
RAM-B-247U-15/17/2/25/3/4: Square rail clamp base with 1” ball, available in various widths
(designated by numerical suffix)
Note that the FAA and other regulatory agencies do not permit permanent mounting of portable
products in type certificated aircraft. All of the mounts included with the D3 can be fixed and removed
without the use of tools.
Included RAM® Mount Components
Replacements for the included RAM® mounting system can be purchased directly from RAM®
Mount and their authorized dealers. The RAM® components that come included with the D3 are:
RAP-224-1U: Suction cup base (3.3” diameter) with twist lock
RAM-B-201U-A: Short double socket arm for 1” ball bases
RAM-B-347U: AMPS square base with 1” ball