Getting started
Eight LEDs allow
the robot to
clean in low-light
conditions.
Auto mode
Analyses dust levels,
automatically optimising
suction power.
Boost mode
Boosts suction to clean
ground-in dirt and pet
hair. Extra power with
less run time.
Quiet mode
Reduces noise for
peaceful areas – and
longer run time.
Triple-action brush bar
Intelligent navigation
Power modes
Four modes, to clean
your way.
LCD touchscreen lets
you see real-time
feedback and choose
between modes.
Swipe through menus,
tap to select, press
and click to confirm
your selection.
LCD touchscreen
Quick mode
Piezo sensor
Detects changes in dust
levels, automatically
increasing suction power
where needed.
Edge cleaner
Tailor your robot with the
MyDyson™app
Set your robot’s behaviour to
suit your lifestyle. Have it learn
your home’s layout, so you can
schedule it to clean when, where
and how you want – only with the
MyDyson™app. If you haven’t
already, download it now.
Automatically redirects
suction to pick up dust
and debris right up to
the wall.
Extends the full width of the
machine to clean edge-
to-edge. Black anti-static
carbon fibre filaments
extract fine dust from hard
floors, stiff nylon bristles
remove ground-in dirt from
carpets, and soft woven
nylon captures large debris.
LED light ring
26 sensors. 360°
panoramic vision.
Allowing the robot to
systematically navigate
and adapt.
To stay on top of every day
cleans in open areas. Your
robot won’t deep clean
edges and corners.
Close up of orange
quick mode arrow
as shown on
machine screen.
Close up of green quiet
mode arrow as shown
on machine screen.
Close up of red
boost mode arrow
as shown on
machine screen.
Close up of blue
auto mode arrow
as shown on
machine screen.
The LCD touchscreen is
located on the top of the
robot between the bin and
LED light ring
Brush bar is housed
within the front of the
robot
The domed
LED light ring
is located at
the top of the
machine to the
front
To Next Page
Loading...
