Starting a clean
Start from the dock
Start the clean by choosing your power mode then press and click the LCD
touchscreen or from the app, to start the clean. Your robot will clean all
areas that are accessible.
Your robot will return to the dock to charge when the battery is low.
Once your robot has charged, it will automatically continue its clean.
Starting a clean off the dock
To clean a specific area or a different level, start your robot away from the dock.
Your robot will clean all the accessible space it can reach on a single charge.
Your robot won't return to the dock to charge, when the battery is low, but return
to its starting point.
You won’t be able to start your clean from the MyDyson™app and your robot
won’t obey room boundaries or restrictions.
Start from the dock with the MyDyson™app or voice control
Start the clean using either the MyDyson™app or with voice control that you
have set up.
Choose to use a customised clean of an individual room, a selection of
rooms, or clean all accessible areas. Your robot will clean following your
mapping, zoning and restriction settings in the MyDyson™app.
Use the MyDyson™app to start your clean or press and click the LCD
touchscreen. You can start your clean from the dock or pick up your robot
and move it to a specific position.
To Next Page
Loading...
