Mapping your home
Prepare to map your home
Before mapping, it’s a good idea to tidy up any loose objects from the floor,
open internal doors and remove any items that may be moved between
cleans. Place your robot on the dock and you can start mapping.
Building a complete map can take time, and depends on the size of your
home (100 sq m may take approximately 90 minutes). During the mapping
process, leave your robot to create your map. It will return to the dock by itself
when mapping is complete.
Create a map
Your robot follows an optimised route to systematically clean your home,
with the brush bar and suction turned off to minimise the time taken to
map. For best results, avoid interrupting your robot while it's mapping.
Your robot needs a complete and accurate map of your home, so if there
are any problems during mapping, it's better to start again.
Multiple floors
If your home has more than one floor level, you can create a map for each
storey or level of your home.
When you clean on a different level of your house, you’ll need to move your
robot’s dock to each level and start each mapping mission from the dock.
Check www.dyson.com for the option to purchase additional docks.
Unlock intelligent features with the MyDyson™app
Your robot works in tandem with the MyDyson™app to intelligently navigate
and deep clean your home. Easily connect to see where it’s cleaned, create
zones and customise your robot’s behaviour.
Creating a map of your home with the MyDyson™app lets your robot learn
the layout. This gives you more control over where and how your robot cleans
areas of your home.
To Next Page
Loading...
