To Next PageTo Next Page
Need help?Do you have a question about the Dyson purifier cool Gen1 and is the answer not in the manual?
General| Airflow | 290 l/s |
|---|---|
| Air speed | 1.2 m/s |
| Cord length | 1.8 m |
| Sleep timer | Yes |
| Air purify rate | - m³/h |
| Number of speeds | 10 |
| Oscillation angle | 350 ° |
| Air purifiers functions | Fan, Heating |
| Noise level (low speed) | 42.6 dB |
| Noise level (high speed) | 61.4 dB |
| Timer duration (maximum) | 8 h |
| Timer duration (minimum) | 1 h |
| Suitable for room area up to | 27 m² |
| Package depth | 260 mm |
| Package width | 257 mm |
| Package height | 1103 mm |
| Package weight | 6850 g |
| Battery type | CR2032L |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (max) | - W |
| Power consumption (standby) | 1 W |
| Fine particle (PM2.5) numeric reading range | 12 µg/m³ |
| HEPA class | HEPA 13 |
| Filter life (max) | 12 month(s) |
| Display type | LED |
| Product color | White |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 204 mm |
| Height | 1050 mm |
| Weight | 4730 g |
| Remote control weight | 25 g |
| Remote control dimensions (W x H x D) | 32.2 x 10.49 x 90 mm |
Details the layout of the remote control, including power, airflow, oscillation, Auto, Night, and Information buttons.
Instructions on how to stop the machine using standby on/off, which continues to monitor air quality.
Enabling continuous monitoring to gather and display particulate matter information on the LCD screen.
Monitors current particulate matter with a graph showing the last 12 seconds of data.
Identifies larger particles (up to 10 microns) like dust, mould, and pollen in the air.
Identifies microscopic particles (up to 2.5 microns) like smoke, bacteria, and allergens.
Displays remaining filter life and indicates when filters need replacing.
Step-by-step guide on how to remove the old filter and install a new HEPA+Carbon filter.
Instructions on how to reset the filter life indicator after replacing the filter using the remote.
Guidelines for cleaning the machine, including wiping with a damp cloth and checking for blockages.
Troubleshooting steps for error codes, including restarting the machine or contacting customer care.
