29
supersonic
Complete the regular weekly filter wash- see p.20/21. If, after completing the weekly filter wash, the machine still overheats
or has low airflow or poor performance carry out the checks below:
Is the product performing as expected (no flashing lights, good airflow)?
Yes
No
Filter wash and machine reset diagnostic
Do you have a dishwasher?
Yes
No
Arrange repair.
Does the product flash 3 white lights
after 30 seconds and continue to work?
Yes
No
Arrange repair.
With the power on in high flow high heat, reset the product
by holding the heat and airflow buttons for 5s. Does it work?
Yes
No
Arrange repair.
Yes
No
Complete recovery clean (see p.29).
Is it still shutting down?
Yes
No
Complete a filter maintenance clean
(see p.20/21). Is it still shutting down?
End sequence
Machine OK to use.
Complete a filter maintenance
clean every week. If used in a
salon recommend cleaning
every day.
End sequence
Machine OK to use. Complete a filter
maintenance clean every week. If used in a salon
recommend cleaning every day (see p.20/21).
End sequence
Machine OK to use. Complete
a filter maintenance clean every
week. If used in a salon recommend
cleaning every day (see p.20/21).
End sequence
Machine OK to use. Complete a filter
maintenance clean every week. If used in a salon
recommend cleaning every day (see p.20/21).
To Next Page
Loading...
