Dyson V8 User Manual

Twist off your filter
Wash your filter
Shake out the water
Twist your filter counter-clockwise and pull it away from your machine.
Place your filter on your machine, aligned in the open position.
Twist clockwise until it clicks securely into position.
Washing filter B
Dry your filter
Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.
Do not dry your filter in a tumble-dryer or near a naked flame.
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Reassemble your machine
Wash the inside of the filter under cold, running water, rotating the filter to
make sure all the inside is clean.
Repeat until the water runs clear.
Empty the filter and shake firmly to remove excess water.
Keep shaking it until there’s no water coming from the filter.
Place your filter, with the open end facing up, to dry.
The filter is placed
under the tap with the
water flowing into the
open end of the filter.

Dyson V8 Specifications

General

Package depth	154 mm
Package width	271 mm
Package height	739 mm
Package weight	3900 g
Rotational speed	110000 RPM
Commodity Classification Automated Tracking System (CCATS)	8508110003
Cleaning type	Dry
Power control	Auto
Country of origin	Malaysia
Filtration system	Yes
Number of settings	2
Vacuum air filtering	-
Dirt separating method	Cyclonic/filtering
Power source	Battery
Charging time	5 h
Battery voltage	- V
Number of battery cells	6
Product color	Nickel
Dust container type	Bagless
Vacuum brushes included	Motorized brush

Weight and Dimensions

Depth	250 mm
Width	221 mm
Height	1256 mm
Weight	2560 g