Motorbar™ cleaner head
De-tangling vanes
automatically clear
wrapped hair from the
brush bar as you clean.
In the box
Your machine will come with one or more of these
cleaner heads – not all will be included.
Vacuum cleaner
Charger
Charges your vacuum
with or without a dock.
Wall dock
The Dyson cordless
vacuum drops into the
wall-mounted charging
dock, ready for your
next clean.
Wand
Crevice tool
Engineered for precise
cleaning around tricky
edges and into hard-to-
reach narrow spaces.
Two tools in one –wide
nozzle and brush,
for quick switching
between cleaning and
dusting tasks around
your home or car.
Combination tool
Hair screw tool
De-tangling conical
brush bar spirals hair
off and into the bin.
Motor-driven cleaning
for smaller spaces.
Some tools may not be included.
You can buy additional tools at www.dyson.com.
Fluff y™ cleaner head
Soft woven nylon removes
large debris, while
anti-static carbon fiber
filaments extract fine
dust from hard floors.
Soft dusting brush
Enclosed in a skirt
of soft nylon bristles
for gentle, vacuum-
assisted dusting of
delicate objects
and surfaces.
Fabric and
mattress tool
Removes dust, dirt
and allergens from
mattresses and
upholstery.
Mini motorized tool
Motorized brush bar,
concentrated in
a smaller head to
remove stubborn
dirt from mattresses,
upholstery and stairs.
Stubborn dirt brush
Stiff nylon bristles
dislodge ground-in dirt
from coarse carpets,
high traffic areas and
car interiors.
Extension hose
Adds up to 24 in of
flexible reach to any tool
attachment, to clean up
high or down low in your
home or car.
Main body
showing the
handle and
bin attached.
A brush bar located inside
the cleaner head and
a suction control slider
located on the front.
A rectangular dock that
needs to be fixed to
a wall with screws.
The charger is a one
piece unit with the plug,
connector end and cable.
The narrow connector end at the top, this connects to the bin
and the wider end at the bottom that connects to the cleaner
head or tool.
A long tool
with an
angled end.
This tool has
a combination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
A small cleaner head
with an angled body
housing the motor and
an electrical connector
to attach to the wand or
directly to the machine.
A soft fluffy brush bar
housed within the
cleaner head. There is
an electrical connecter
end that can attach to
the end of the wand or
directly to the machine.
Pliable bristles and
felt bumper strip on
a narrow, tapered tool.
A wide,
triangular
shaped
nozzle.
A small cleaner head
with a body housing the
motor and an electrical
connector to attach to
the wand or directly to
the machine.
A short nozzle with
stiff bristles on the
underside.
A flexible hose
engineered from
tough wire and
durable plastic.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
