E-FLITE Cap 232 BP 3D - Airframe Assembly

Airframe Assembly
Required Parts
Fuselage
Wing Stabilizer
Required Tools and Adhesives
Felt-tipped pen
Ruler
String
Hobby knife w/#11 blade
Thin CA
Sandpaper
 1. Locate the wing and fuselage. Slide the wing
into the fuselage and center it as shown in the
drawing. Use either a ruler or a ruler and string
to ensure the dimensions are the same as shown.
A=A
AA
Hint: Use the opening in the bottom of the wing
for the servos to help in alignment.
13