Need help?Do you have a question about the E-Mon Class 3200 and is the answer not in the manual?
General| Brand | E-Mon |
|---|---|
| Model | Class 3200 |
| Category | Measuring Instruments |
| Language | English |
Details connections and components of the main power board for meter operation.
Describes the display board, its LCD, and push button controls for user interaction.
Instructions for physically mounting the meter enclosure to a surface.
Details on connecting power and ground wires to the main power board.
Procedure for verifying correct 3-phase AC power input sequence.
Guide to installing and connecting current sensors for accurate load monitoring.
Visual diagram illustrating power and sensor wiring for 3-phase, 4-wire systems.
Troubleshooting messages for line voltage and current sensor issues.
Instructions for connecting meters using the RS-485 communication protocol.
Setup for connecting meters via RS-232 using the E-Mon Energy software.
Configuration for connecting meters to a telephone line via modem.
Guide for connecting meters via RS-485 using the Modbus RTU protocol.
Instructions for connecting meters using the BACnet MS/TP protocol.
Procedure for connecting meters to a PC via a USB Key for data access.
Instructions for connecting meters via Ethernet using an EKM-E key converter.
Description of screens displayed when the meter powers on.
Explanation of the seven normal operating display screens showing meter data.
Steps to program date, time, device ID, and reset demand readings.
Procedure to set the current date and time on the meter.
Steps to change the meter's Device ID for EZ7 and ModBus protocols.
How to reset the recorded peak kW demand to zero.
How to lock the display on a specific screen for a set duration.
To Next Page
