Need help?Do you have a question about the E-Mon D-Mon and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Display | LCD |
| Voltage | 120/240, 208, 277, 480 |
| Current | 2000A |
| Communication | Modbus, BACnet |
| Enclosure Rating | NEMA 1 |
| Operating Temperature | -20°C to 60°C |
| Dimensions | Varies depending on model |
Describes the main subassembly boards of the unit.
Important warnings about high voltages, grounding, and opening the unit.
Details on how to mount the meter enclosure to a surface.
Instructions for ESD protection and connecting the protective earth ground wire.
Explains how to install and wire current sensors.
Provides diagrams for wiring line voltage and current sensors.
Details on how to diagnose line voltage and current sensor issues.
Instructions for connecting the meter via RS-485 communication.
Explains how to connect the optional modem module.
Displays the energy delivered from the utility.
Displays the energy received by the utility.
Displays the net energy reading.
This screen is not utilized at this time.
Displays the real-time net load in kW.
This screen is not utilized at this time.
Displays estimated carbon footprint from delivered energy.
Displays estimated carbon footprint based on present load.
Can voltage be tapped from the same breaker being monitored?
Can line voltage and current sensor wires run in the same conduit?
Can communication and voltage wires run in the same conduit?
How to find the cost per kWh for billing tenants.
What wire size to use for line voltage leads.
What wire size to use for extending current sensor leads.
What to do if the meter isn't working after troubleshooting.
To Next Page
