Need help?Do you have a question about the E-Mon Class 2000 and is the answer not in the manual?
General| Model | Class 2000 |
|---|---|
| Frequency | 50/60 Hz |
| Display Type | LCD |
| Communication Protocol | Modbus, BACnet |
| Current Inputs | 3 |
| Enclosure Rating | NEMA |
| Measurement Type | Energy (kWh), Power (kW), Demand (kW), Voltage (V), Current (A), Power Factor (PF), Frequency (Hz) |
| Accuracy | ±1% |
| Operating Temperature | -40°C to 70°C |
Instructions for physically attaching the meter to a surface.
Steps for connecting power and ground wires to the main power board.
Procedures for connecting current sensor leads to the main power board.
To Next Page
