CLASS 2000 METER
3 62-0389-03
TABLE OF CONTENTS
Section 1.0 Pre-Installation Information 4
Section 2.0 Safety Label Definitions and Information 6
Section 3.0 Precautionary and Safety Information 7
Section 4.0 Meter Installation 8
Section 4.1 Mounting the Meter 8
Section 4.2 Main Power Board Connections 8
Section 4.3 Current Sensor Installation & Wiring 11
Section 4.4 MAINS Line Voltage & Current Sensor Wiring
Diagrams
14
Section 4.5 Installation Overview 16
Section 4.6 Check Polarity of the Current Sensor 16
Section 5.0 Monitoring Multiple Loads with One Meter 18
Section 6.0 KWh Meter Features & Functions 20
Section 6.1 KWh Meter Display Features 20
Section 6.2 How to Read the kWh Meter 22
Section 6.3 KWh Meter Hardware Functions 22
Section 6.4 Class 1000 and Class 2000 Pulse Output Removable
Two-Screw Terminal Plug
22
Section 7.0 KWh/Demand Meter Features & Functions* 24
Section 7.1 KWh/Demand Meter Display Functions 24
Section 7.2 How to Read the kWh/Demand Meter 25
Section 7.3 Demand Display Set-Up 26
Section 7.4 Demand Reset 28
Section 8.0 Preventative/Scheduled Maintenance 29
Section 9.0 Lithium Battery Replacement Instructions 30
Section 10.0 Troubleshooting Guide 32
Section 10.1 Line Voltage Diagnostics 33
Section 10.2 Current Sensor Diagnostics 34
Section 11.0 High Voltage Metering 35
Section 12.0 Frequently Asked Questions 38
Section 13.0 Meter Technical Specifications 40
Section 14.0 Meter Limited Warranty 43
* Applies to meters equipped with the Demand option.
To Next Page
Loading...
Need help?
General
