CLASS 3200 METER
5 62-0390-02
Internal circuit components are extremely sensitive to electrostatic discharge.
Prior to handling or touching internal circuitry, discharge any static buildup on
your person. To discharge yourself, touch a grounded metal object such as
conduit or an earth-grounded enclosure.
Use of this instrument, the E-Mon D-Mon Class 3200 meter, in a manner
inconsistent with this manual or not specified by the manufacturer in writing,
can cause permanent damage to the unit and/or serious injury to the operator.
The protection and safety features provided by this equipment may become
impaired or otherwise compromised.
NOTE: If any trouble arises during the installation or functional verification opera-
tions, do not immediately remove the unit. Before removing the unit, contact
E-Mon’s technical support and/or engineering department at (800) 334-3666.
E-Mon’ s technical department will assist you in detailed troubleshooting of
the Class 3200 meter installation and assist you in getting the unit operating
correctly.
To Next Page
Loading...
