2.0 Meter Technical Specifi cations (continued)
Standard Ranges:
4-Wire, Wye 120/208 VAC: 100, 200, 400, 800, 1600, 3200 Amp
4-Wire, Wye 277/480 VAC: 100, 200, 400, 800, 1600, 3200 Amp
3-Wire, Delta 220/240 VAC: 100, 200, 400, 800, 1600, 3200 Amp
3-Wire, Delta 480 VAC: 100, 200, 400, 800, 1600, 3200 Amp
Modem Interface
Cable: UL Listed/rated telephone cord, 4-conductor, 300
VAC, stranded conductors, 22-26 AWG
Cable Connector: RJ-11 IDC Termination
Ckt Input Isolation: 2120 VDC, UL File # 150299, Std. 60950
Baud Rate: 9600
RS485 Serial Communication Interface
Cable: UL Listed/rated telephone cord, 4-conductor,
300 VAC, stranded conductors, 22-26 AWG
In/Output Voltage: Ground Isolated +/- 5.4 VDC
Cable Connector: RJ45 male IDC or screw terminal termination
Ckt Input Isolation: 5.3K VAC
Max Cable Distance: 2,000 Feet
Max Network Nodes: Maximum cabling nodes 64 including master node
Baud Rate: 9600
Recommended In-Line Fuse:
Manufacturer: Littlefuse
Mfg Part No.: KLDR.100
Rating: 100mA, Time Delay, 600 VAC Cartridge Fuse
Battery Cell:
Description: Non-rechargable cell used for memory retention
Manufacturer: Eagle-Picher
Mfg Part No.: LTC-3PN
Working Voltage: 3.5 VDC
Current Capacity: 350mAHr
Electrolyte: Lithium Thionyl Nitrate
Page 5
To Next Page
Loading...
Need help?
General
