26 ESI-32 Operation Manual
2. While holding Transpose, select the desired transposition
interval. All transpositions are referenced to C2, the second C from
the left hand side of the keyboard.
Some examples are:
• To transpose down one octave, press C1.
• To transpose up one octave, press C3.
• To transpose up a fourth, press F2.
Note that pressing keys C#3-C4, C#4-C5, or C#5-C6 will, in each case,
produce the same effect as pressing keys C#2-C3.
3. While holding Transpose, check the display to confirm the
transposition interval. Upward transpositions are indicated with a
+ symbol, downward transpositions with a - symbol. For example, if
the ESI-32 is transposed up a fifth, the display will show:
TRANSPOSE
+G
Play a Key
4. Release Transpose to retain the transposition. The Transpose LED
stays lit to remind you that the ESI-32 is transposed.
5. To cancel the transposition, press and hold Transpose and press
C2. Display line three will go blank. Release Transpose and the LED
should now be off.
To Next Page
Loading...
